5
Lowes.com/allenandroth
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or install the
product.
• Make sure all electrical connections comply with local codes, ordinances, or the National Electrical
code. Hire a qualifi ed electrician or consult a do-it-yourself wiring handbook if you are unfamiliar
with installing electrical wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to
the fl oor and at least 30 in. from the ends of the blades to any obstruction.
• If you are mounting the fan to a ceiling outlet box, use a METAL octagonal outlet box.
• Secure the box directly to the building structure. The outlet box and its support must be able to
support the moving weight of the fan (at least 35 lbs.). Do NOT use a plastic outlet box.
• After you install the fan, make sure all connections are secure to prevent the fan from falling.
• For supply connections, if the conductor of a fan is identifi ed as a grounded conductor, then it
should be connected to a grounded conductor power supply. If the conductor of a fan is identifi ed
as an ungrounded conductor, then it should be connected to an ungrounded conductor power
supply. If the conductor of a fan is identifi ed for equipment grounding, then it should be connected
to an equipment-grounding conductor.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note
: This equipment has been tested and found to comply with the limits for Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
Note
: For a Class A digital device, statements of 15. 105(a) must be included when appropriate for
the device in question.
• The net weight of this fan is: 19.95 lbs.
WARNING
:
• Do not install or use this fan if any part is damaged or missing.
• To reduce the risk of fi re, electrical shock, or personal injury, wire connectors provided with this
fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your
house wire is larger than 12 gauges or there is more than one house wire to connect to the two fan
lead wires, consult an electrician for the proper size wire connectors to use. Before cutting, drilling
or hammering, verify their location. If needed, contact your electrician, plumber or service person.