Allen Engineering Corporation 049600, Operations & Parts Manual

Page: 48 / 102

3-10
SECTION 3
SERVICE
049854; 03/09
3.5
Right/Left Hand Control Lever Adj.
3.5 RH Control Lever Adjustment Right Or Left Procedure
If levers become out of adjustment adjust the right hand lever as follows:
1) Loosec jam nuts [D] .
2) Remove bolt [C] .
3) Extend linkage to move control levers to the right .
4) Shorten linkage to move control levers to the left.
5) After control lever has been adjusted to the desired position reassemble bolt
[C] and tighten jam nuts [D] .
3.5 RH Control Lever Adjustment Right Or Left Procedure
If levers become out of adjustment adjust the right hand lever as follows:
1) Loosen jam nuts [D] .
2) Remove bolt [C] .
3) Extend linkage to move control levers to the right .
4) Shorten linkage to move control levers to the left.
5) After control lever has been adjusted to the desired position reassemble bolt
[C] and tighten jam nuts [D] .