Allen-Bradley SLC 500 DeviceNet, User Manual, Page: 90 / 139

Publication 1747-6.5.5 - August 2000
6-4 Creating and Running the Example Application Program
Downloading and Running
the Program
You cannot go online to the processor directly over the DeviceNet
network. The following sections provide examples of downloading
and running the program using the following networks:
•
ControlNet (page 6-4)
•
Ethernet (page 6-6)
•
Data Highway Plus (page 6-8)
Downloading and Running the Program via a ControlNet Network
Follow the procedure below to download and run the example
program via a ControlNet network.
1. Click on the RSLogix 500 Communications menu and select
System Comms .
2. The Communications window will appear (Your window may
look different depending upon the drivers and other devices you
have installed):
3. Select the “+” next to your ControlNet driver ( AB_KTC-1 above) to
expand the tree.
4. Highlight the 1747-KFC15 module as shown above and click on the
Download button. Your program will be downloaded to the
controller.
5. After the download is complete, change the SLC 500 processor
mode to
Run .