Allen-Bradley PowerFlex 20-HIM-A6, User Manual

Page: 33 / 74

Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017 33
Chapter
4
Using the HIM
This chapter provides information about using the HIM.
For a list of parameters, see Appendix B , HIM Parameters.
Initial HIM Operation on New
Drive Powerup When powering up a new drive for the first time, the HIM runs through an
initial operating routine that does the following:
•
Prompts you to select a language.
• Initiates a drive start-up routine.
• Initiates a port verification check (only for PowerFlex® 750-Series drives).
If a port conflict is detected, see
page 62 for information to resolve it.
Topic Page
Initial HIM Operation on New Drive Powerup 33
Selecting Display Contrast 34
Setting the Date/Time for PowerFlex 750-Series Drives 35
Creating a User-Defined Drive/Peripheral Name 37
Customizing the Process Screen 38
Resetting the Drive/Peripherals 40
Setting Factory Defaults 40
Setting Display Flashing for Fault Indication 42
Setting Display Flashing for Alarm Indication 43
Viewing/Editing Drive or Peripheral Parameters 44
Viewing/Clearing Drive Faults or Alarms 46
Viewing Peripheral Diagnostic Items 47
Viewing/Clearing Peripheral Events 48
Checking Drive and Peripheral Firmware Revisions 49
Using the CopyCat Function 50
Changing PowerFlex 750-Series Drive Parameter Associations 54
Linking Parameters in PowerFlex 700/700S Drives 57
Using an Access Code 59
Initiating PowerFlex 750-Series Drive Port Verification 62
Changing Language for the Display Text 64
Updating the HIM Firmware or Language 65