Allen-Bradley PowerFlex 20-HIM-A6 User Manual Download Page 64

Page: 64 / 74

Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017

Chapter 4

Using the HIM

Follow the screen prompts to resolve the port conflict.

Or press the ENTER

soft key

to affirm and re-display the Device Conflicts

popup box.

Changing Language for the
Display Text

All HIM screen text can be displayed in one of the supported languages. The
default language is English.

Follow these steps to select another supported language.

Access the Status screen (see

Figure 6

Press the

(Language)

soft key

to display the list of available languages.

Use the

key to select the desired language.

Press the

(Enter) key to enter the selected language.

All HIM screen text now appears in the selected language.

Stopped

0.00 Hz

AUTO

X05: Not Functioning

This device must be

removed or replaced.

Prev: Encoder

ENTER

TIP

If the drive is set to a language not supported by the HIM, a popup box appears
asking you to select another language.

Summary of Contents for PowerFlex 20-HIM-A6











































































Search results

Summary of Contents for PowerFlex 20-HIM-A6

Reviews:

Related manuals for PowerFlex 20-HIM-A6

Brands by name

Popular brands

Allen-Bradley PowerFlex 20-HIM-A6, User Manual

Search results

Summary of Contents for PowerFlex 20-HIM-A6

Reviews:

Related manuals for PowerFlex 20-HIM-A6

Brands by name

Popular brands