manualshive.com logo in svg

Allen-Bradley PowerFlex 20-COMM-P, User Manual, Page: 10 / 117

Share
Download
Allen-Bradley PowerFlex 20-COMM-P User Manual Download Page 10

1-2

Getting Started

The PROFIBUS adapter features the following:

•

The adapter is mounted in the PowerFlex drive. It receives the 
required power from the drive.

•

Switches let you set a node address before applying power to the 
PowerFlex drive. Alternatively, you can disable the switches and use 
parameters to configure this feature.

•

Captive screws are used to secure the adapter to the drive. 

•

A number of configuration tools can be used to configure the adapter 
and connected drive. The tools include the PowerFlex HIM on the 
drive, or drive-configuration software such as DriveExplorer 
(version 2.01 or higher) or DriveExecutive (version 1.01 or higher).

•

Status indicators report the status of the drive, adapter, and network. 
They are visible both when the cover is opened and when it is closed.

•

I/O, including Logic Command/Reference and up to four pairs of 
Datalinks, may be configured for your application using a parameter. 

•

Explicit messages are supported using the Parameter Protocol.

•

User-defined fault actions determine how the adapter and PowerFlex 
drive respond to communication disruptions on the network and 
controllers in idle mode.

The PROFIBUS adapter is compatible with Allen-Bradley PowerFlex 
drives and other products that support DPI. DPI is a second generation 
peripheral communication interface and is a functional enhancement to 
SCANport. At the time of publication, compatible products include:

•

PowerFlex 70 drives

•

PowerFlex 700 drives

•

PowerFlex 7000 drives

Features

Compatible Products

20COMM-UM006A-EN-P.book  Page 2  Friday, September 28, 2001  10:43 AM

Summary of Contents for PowerFlex 20-COMM-P






















































































































Reviews:

No comments