4
Attention:
Do not open the printers enclosure! Opening the enclosure will cause loss of
any warranty rights and may result in severe injuries.
3.2 Precautionary measures
Observe the following when using the FAST TRACK
TM
Printer, handling ink cartridges or choosing a
location to install the FAST TRACK
TM
Printer:
A. Working with the FAST TRACK
TM
Printer
•
Check the wipe and scratch resistance of the ink at regular intervals.
•
Do not put your hands inside the FAST TRACK
TM
Printer, and do not touch the ink cartridge
when the printer is in operation.
•
Do not move the print head by hand, as this could damage the FAST TRACK
TM
Printer.
•
Remove your printouts immediately after printing from the output rail of the FAST TRACK
TM
Printer.
•
Always turn the FAST TRACK
TM
Printer on/off using the main switch on the operating panel.
•
Before transporting the FAST TRACK
TM
Printer, ensure that the print head is in the home
position (far right-hand side), and ensure that the ink cartridges are seated correctly.
B. Handling ink cartridges
•
Keep unused ink cartridges in a cool and dry place.
•
Keep ink cartridges out of reach of children. Never allow ink cartridges to fall into the hands of
children. Never allow anyone to drink from them.
•
Always handle used ink cartridges with care, because a small amount of ink could remain in the
ink supply outlet. If you get ink on your skin, wash it thoroughly with soap and water. Consult a
doctor immediately, if after thoroughly rinsing the ink you still feel unwell or have problems with
your vision.
•
Do not shake ink cartridges, as this can cause ink to leak.
•
Install ink cartridges immediately after removing form the packaging. The print quality can be
impaired if an ink cartridge is left unpacked for any length of time before use.
•
Do not use ink cartridges beyond the ‘use by date’ printed on the cartridge packaging. For best
results, the ink in the cartridge should be used within six months of installation.
•
Do not dismantle or try to refill ink cartridges. This could result in damage to the print head.
•
Before using an ink cartridge that has been stored in a colder place, allow the cartridge to
acclimatize to the room temperature for at least three hours.
•
Do not touch the IC chip on the side of the cartridge. This could impair print operations.
Tamper proof label