19
Caution:
•
Use only ink cartridges from Allen Bradley, Cat. No. 1492-PRTINKCART or 1492-PRTCLEAN
•
Remove used ink cartridges only when you have a replacement available and have prepared
the installation. Otherwise, any ink remaining in the nozzles could dry out.
•
Do not refill the ink cartridges. The FAST TRACK
TM
Printer calculates the remaining level of ink
in the cartridges with the help of the IC chip on side of the ink cartridge. The IC chip does not
recalculate the remaining level of ink when the cartridge is refilled, so that the available amount
of ink does not change.
Note:
You cannot continue with a print job if the ink cartridge is empty. You must replace the empty cartridge
first, before you can proceed with printing.
•
Ink is not only expended when printing Marker Cards. It is also used during print head cleaning,
when replacing the ink cartridges as well as during the self-cleaning cycle that takes place every
time the FAST TRACK
TM
Printer is turned on.
7. Error indication
Error message:
LED indicator – Marker Card is not inserted correctly
LED Indicators:
The red LED lights up constantly and the green LED flashes.
Remedy:
Check if the strip has been correctly inserted or if an unknown print job is active
in the printer driver. Open the printer driver and delete the print job.
Error message:
Paper jam
LED indicator:
The red LED lights up constantly and the green LED flashes.
Remedy:
Settings in the printer driver: The FAST TRACK
TM
Printer settings are not
correct. (Please see Section 4.1 for Settings)
For more information, please refer to the Short Installation Manual.
If it is not possible to acknowledge a fault in the FAST TRACK
TM
Printer by pressing button 3 or via the
Status Monitor, pressing the reset button once will reset the printer.
Strip was transported through: If the operator first forgets to insert a Marker Card then inserts one when
the FAST TRACK
TM
Printer is attempting to draw in a non-existent Marker Card, then it will transport the
Marker Card added later through the device without printing.
If you forget to insert a Marker Card, allow the FAST TRACK
TM
Printer to continue and issue an error
message, add a Marker Card then acknowledge the error by pressing the maintenance button.
Error message:
Ink cartridge not recognised
Remedy:
Remove the adhesive labels and check if the cartridge was correctly inserted.
Re-insert the ink cartridge.