4
E3 Plus EtherNet/IP Adapter
Rockwell Automation Publication 2100-IN090A-EN-P - February 2012
Status Indicators
The adapter uses four status indicators to report its operating status.
Set the IP Network Address
The E3 Plus EtherNet/IP adapter is shipped with Bootstrap Protocol (BOOTP) enabled. You
can set the network Internet Protocol (IP) address by using the BOOTP/DHCP server that is
provided with RSLinx Classic software. This utility recognizes BOOTP-enabled devices and
provides an interface to configure a static IP address for each device.
To assign network parameters via the BOOTP/DHCP utility, perform this procedure.
1.
Start the BOOTP/DHCP software.
Item
Name
Color
State
Description
1
PORT
Green
Flashing
Normal Operation. The adapter is establishing an I/O connection to the E3 Plus
overload relay. It will turn steady green or red.
2
MOD
Steady
Normal Operation. The adapter is properly connected and communicating with
the E3 Plus overload relay.
3
NET A
Green
Flashing
Normal Operation. The adapter is operating but is not transferring I/O data to a
controller.
4
NET B
Steady
Normal Operation. The adapter is operating and transferring I/O data to a
controller.
Status Indicators
