Installation Instructions
E3 Plus EtherNet/IP Adapter
Catalog Number 2100-ENET
Introduction
The E3 Plus EtherNet/IP adapter is a linking device that lets users connect an E3 or E3 Plus
Solid State Overload or an 825-P Motor Protection System directly to an EtherNet/IP network.
This document explains the basic steps needed to configure the E3 Plus EtherNet/IP adapter.
Topic
Page
Introduction
1
Important User Information
2
Adapter Components
3
Status Indicators
4
Set the IP Network Address
4
Install EDS File
7
Logix Controller I/O Messaging
9
Additional Resources
12
