6
Logix Expansion Board for DriveLogix™5730
Step 6: Installing the
DriveLogix5730 Expansion
Board
Step 7: Installing and
Configuring the Options
Which Require the
DriveLogix5730 Expansion
Board
Referring to the documentation for the options, install them. Allen-Bradley
publications are available on the internet at
www.rockwellautomation.com/literature
.
Step 8: Replacing the
Covers and Control
Cassette
The procedure for replacing the covers and control cassette is the reverse of
removing these components. Refer to
Step 4: Removing the Outside Covers
from the Control Cassette on page 5
and
Step 3: Removing the Control
Cassette from Drive on page 4
.
A
B
C
C
C
C
Task
Description
Align connector on DriveLogix5730 Expansion
Board with connector on Main Control Board
Place DriveLogix5730 Expansion Board on the
Main Control Board
Install and tighten screws (7-10 lb.-in.)
A
B
C
C
=
Document
Publication Number
Compact I/O Cable for DriveLogix5730 Controller
20D-IN008
…
ControlNet Communications Daughtercard (coax)
Installation Instructions
1788-IN002
…
ControlNet Communications Daughtercard (fiber)
Installation Instructions
1788-IN005
…
EtherNet/IP Communications Daughtercard Installation
Instructions
1788-IN054
…
DeviceNet Communications Daughtercard Installation
Instructions
1788-IN053
…
