6
DeviceNet CompactPCI Communication Interface Card
Publication 1784-IN036B-EN-P - May 2001
EMC Directive
This product is tested to meet Council Directive 89/336/EEC Electromagnetic
Compatibility (EMC) and the following standards, in whole or in part, documented
in a technical construction file:
•
EN 50081-2 EMC - Generic Emission Standard,
Part 2 - Industrial Environment
•
EN 50082-2 EMC - Generic Immunity Standard,
Part 2 - Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers, Part 2 -
Equipment Requirements and Tests.
•
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as the following Allen-Bradley
publications:
•
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
•
Automation Systems Catalog, publication B111
This equipment is classified as open equipment and must be installed (mounted) in
an enclosure during operation as a means of providing safety protection.
Use Care When Handling the Card
ATTENTION
!
The card uses CMOS technology, which is highly sensitive to
electrostatic discharge (ESD). ESD may be present whenever
you are handling the card. Handling a card without any EDS
protection can cause internal circuit damage that may not be
apparent during installation or initial use.
