4 DeviceNet Digital Base Terminal Block CompactBlock LDX I/O
Publication 1790-IN012C-EN-P - January 2015
WARNING:
If you connect or disconnect the communications cable with
power applied to this module or any device on the network, an electrical arc
can occur. This could cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before
proceeding.
WARNING:
If you connect or disconnect wiring while the field-side power is
on, an electrical arc can occur. This could cause an explosion in hazardous
location installations.
Be sure that power is removed or the area is nonhazardous before
proceeding.
ATTENTION:
To comply with the CE Low Voltage Directive (LVD), all wiring
connections to this equipment must be powered from a source compliant with
the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
ATTENTION:
To comply with UL restrictions, DeviceNet must be powered
from a source compliant with the following:
Class 2 or Limited Voltage/Current.