ControlNet-to-DeviceNet Linking Device
5
1788-5.2B - October 1999
Installing the CN2DN Module
The CN2DN module has a clip for mounting on a standard 35 mm steel DIN rail.
Follow these steps to mount the CN2DN onto the DIN rail.
Important: You must use a steel DIN rail (A-B P/N 199-DR1 or equivalent) to
meet vibration specifications listed on page 34.
1. Press the module straight onto the DIN rail at the desired location. Be sure
that both latches snap into place.
Figure 2 Mounting the CN2DN Module on the DIN Rail
2. Use the supplied end anchors to lock the module into place.
Figure 3 End Anchors and Mounting Tabs
Note that for very high shock applications the module may be bolted to the panel
through the four mounting tabs on the base.
DIN Rail
CN2DN Module
PRESS ON
Wall or Support
30901-M
Mounting Tabs
Mounting Tabs
End Anchor
End Anchor
Allen-Bradley Parts