34
Industrial 17" CRT Monitor
Publication 6159-5.1
Specifications
Display
CRT Type
17” diagonal flat square, 0.27mm dot pitch
RGB short persistence (Hi-EU Red)/Dark TINT,
Tension-band implosion protected
Degaussing
Manual and automatic
Nominal Display Area
(4:3 aspect) Horizontal
(4:3 aspect) Vertical
Diagonal
11.8in. (300mm +/- 3mm)
8.9in. (225mm +/- 3mm)
14.8in. (375.9mm)
Non Linearity (CHP Method)
Horizontal
Vertical
7% max
6% max
Regulation
2mm max peak deviation
Misconvergence
0.3mm max inside centered circle 225mm dia.,
0.4 max outside
Luminance (typical)
35 fL +/- 5% fL, small white square
CIE coordinates
White
x:=0.283, y:=0.298 (9300K +8MPCD)
Video
Resolution
640 x 480 to 1280 x 1024 (monitor will sync to 1280 x
1024, though tube dot pitch 1024 x 768
Supported Standards
IBM VGA (640x480 at 60Hz )
VESA (640x480 at 60/72Hz, 800x600 at 56/60/72Hz,
1024x768 at 60/70Hz)
DEC (1024x864 at 60Hz, 1280x1024 at 66/72Hz)
Horizontal Scan Rate
Variable: 30kHz to 70kHz
Vertical Scan Rate
Variable: 50Hz to 180Hz
Retrace Times
Horizontal
Vertical
2.7 usec max
0.475 msec max
Video Bandwidth
86MHz
Video Input Signal
RGB analog (white level = 0.714V above ref. black,
into 75 Ohms, single ended)
Sync Input Signals
Separate Horizontal and Vertical Sync Control, TTL
signal levels
Sync on green (0.286V below ref. black) or
Composite separate (into 75 Ohms, single ended)
Input Connection
HD-15
Controls and Indicators
Front Panel: operation keys access on-screen
display (H Size, H Pos, V Size, V Pos, Contrast,
Brightness, Manual Degauss, Raster Rotation, etc.)
Operator Input
Touchscreen Option: Resistive or capacitive
touchscreen, with serial controller and driver software