Allen-Bradley 6300B-PBCx, User Manual

Page: 13 / 38

Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020 13
Chapter
2
Install the Wall Mount Box PC
Follow these guidelines and procedures to help you plan your installation, and
mount and power up the VersaView® 6300B wall mount box PC.
Unpack the Computer Before you unpack the computer, inspect the shipping carton for damage. If
damage is visible, immediately contact the shipper and request assistance.
Otherwise, proceed with unpacking.
Keep the original packing material in case you must return the computer for
repair or transport it to another location.
Parts List The wall mount box PC ships with the following items.
Prepare for Installation
Read and follow these precautions before you install the wall mount box PC.
Environment and Enclosure Information
Item Description
Hardware
• For Cat. No. 6300B-PBCx models: DC power connector assembly kit
• For Cat. No. 6300B-PBDX models: A grounded, 3-prong IEC60320-C13 power cord
Document VersaView 6300B Wall Mount Box PCs Installation Instructions, publication 6300B-IN002
ATTENTION: This equipment is intended for use in a Pollution Degree 2 industrial
environment, in overvoltage Category II applications (as defined in IEC 60664-1), at
altitudes up to 2000 m (6561 ft) without derating.
This equipment is considered Group 1, Class A industrial equipment according to
IEC/EN 61326-1. Without appropriate precautions, there can be potential difficulties
with electromagnetic compatibility in other environments due to conducted as well
as radiated disturbance.
This equipment is considered open equipment, which means it must be mounted in
an enclosure where the equipment can be operated from the front panel.
The enclosure in which this equipment is installed must be accessed only with a
key or tool, and only by trained and authorized personnel.
In addition to this publication, see the following:
• Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1 , for
more installation requirements
• UL 50, CSA C22.2 No. 94.1, and IEC 60529, as applicable, for explanations of the
degrees of protection provided by enclosures