6
Adapter Plate Kit for PanelView 800, 7-inch and 10-inch Terminals
Publication 2711R-IN002A-EN-P - March 2015
2.
Insert all mounting levers into the mounting slots of the terminal.
Slide each lever until the flat side of the lever touches the surface of the panel.
3.
When all levers are in place, slide each lever an additional notch or two until you hear a click.
4.
Rotate each lever in the direction indicated until lever is in the final latch position. Follow the
latching sequence below to obtain the optimum terminal fit.
IMPORTANT
Use thin mounting levers only when using the 2711R-T7T terminal with the adapter plate.
Short, flat side of mounting lever
Mounting levers
Mounting slots
Rotate until notch in lever aligns with
proper alignment mark on terminal.
Notch
Six alignment marks
Latching sequence for 2711R-T7T
Latching sequence for 2711R-T10T
1
4
3
2
5
6
1
4
3
2
5
7
8
6
