Adapter Plate Kit for PanelView 800, 7-inch and 10-inch Terminals
3
Publication 2711R-IN002A-EN-P - March 2015
Package Contents
The Cutout Adapter Kit includes:
•
A cutout adapter plate with waterproof gasket
•
#8-32 nuts with lock washers (6 sets)
•
Thin mounting levers (8)
Tools Required
The following tools are required for installation:
•
Socket driver with 11/32-inch socket
•
Torque wrench capable of 1.36 Nm (12 in-lb) torque
Disconnect the Terminal
1.
Disconnect power at the source and remove the power cord from the PanelView terminal.
2.
Disconnect all communication cables from the terminal.
Remove the Existing Terminal
1.
Remove the self-locking levers that secure the terminal to the panel.
2.
Slide the existing terminal out from the panel.
IMPORTANT
Thin mounting levers are only included with 2711R-APK7 and are for use with 2711R-T7T.
There are no mounting levers included with 2711R-APK10. Use the regular mounting levers
that come with 2711R-T10T.
ATTENTION:
Make sure the power cord and all communication cables have been
disconnected from the PanelView terminal.
Regular mounting lever
Thin mounting lever
