Rockwell Automation Publication 1794-IN104C-EN-P - July 2018
7
FLEX I/O 220V AC Digital Input and Output Modules
Installing Your 220V AC Digital Input or Output Module
The module mounts on a 1794 terminal base
.
1. Rotate the keyswitch (1) on the terminal base (2) clockwise to position
8
as required for this type of module.
2. Ensure that the Flexbus connector (3) is pushed all the way to the left to
connect with the neighboring terminal base/adapter.
You cannot install
the module unless the connector is fully extended
.
3. Make sure the pins on the bottom of the module are straight so they will
align properly with the connector in the terminal base.
Description
Description
1
Keyswitch
5
Alignment bar
2
Terminal base
6
Groove
3
Flexbus connector
7
Latching mechanism
4
Module
ATTENTION:
During mounting of all devices, be sure that all debris (metal chips,
wire strands, etc.) is kept from falling into the module. Debris that falls into the
module could cause damage on power up.
1
2
3
4
5
6
7
