Use the DeviceNet Test Application for 1784-PCIDS Diagnostics
5-3
Publication 1784-IN004D-EN-P - August 2002
Create a View
To go online and cfreate a view, follow these steps:
1.
From the
Setup
menu, select
Create View...
.
2.
Select
Port Names
.
3.
Select
Message Type (Input, Output, or Input/Output)
.
4.
Select
Privilege (Read Only, Read/Write)
.
5.
Click
OK
. You see a message box that tells you that the operation was
successful.
Change the Scanner Mode
The Port Mode window displays the current mode of the scanner: Run, Idle, No
View.
Once you create a view, you can use the Switch Mode button to change the mode
between Run and Idle.
Read Inputs
Read Inputs lets you read as many as 2048 bytes from the input image table of the
1784-PCIDS. A simple dialog box with scrolling capability (shown in the figure
below) is displayed and is automatically updated when inputs change.
TIP
The hexadecimal number on the left side of the input or
output table is the count in bytes.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
