Install the Driver in Windows 2000
3-9
Publication 1784-IN004D-EN-P - August 2002
11.
Click
Browse
and browse to this location:
x:\abpcid.inf
where x:\ is the drive where the installation files are stored.
12.
Click
Open
.
13.
Click
OK
.
14.
Follow the on-screen instructions for installing the Driver.
15.
Go to the next section, Install 1784-PCID Driver Software, on page 3-9.
Install 1784-PCID Driver Software
1.
Insert the floppy disk in the computer’s floppy disk drive, or access the
compressed file you downloaded and saved to a temporary directory.
2.
Select
Start
⇒
Run
.
3.
At the Run pop-up window, type
x:\setup
where
x
is the drive where the
installation files are stored.
4.
Click
OK
and follow the on-screen instructions to install the 1784-PCID
Driver Software.
5.
Click
Next.
TIP
When you close the Properties screen, you may be prompted
to restart your computer. If you get this prompt, restart your
computer before using this updated Driver.
IMPORTANT
To ensure that the card works properly, you must install Driver
Software as described on page 3-9.
IMPORTANT
We recommend that you exit all Windows programs before
running this Setup program.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
