Allen-Bradley 1747-KE, User Manual

Page: 39 / 139

1 Publication 1747-UM005B-EN-P - March 2006
Chapter
4
Installation and System Configuration
This chapter provides the following installation and system
configuration information.
•
European Union directives compliance
•
Module functionality
•
Mode selection
•
Port configuration verification
•
Module installation
•
Cable connection
•
S
LC chassis, DF1 driver, and module configuration
European Union Directives
Compliance
If this product has the CE mark, it is approved for installation within
the European Union and EEA regions. It has been designed and tested
to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
•
EN 50081-2
EMC - Generic Emission Standard, Part 2 - Industrial
Environment
•
EN 50082-2
EMC - Generic Immunity Standard, Part 2 - Industrial
Environment
This product is intended for use in an industrial environment.
ATTENTION
Do not install or remove the 1747-KE module from
the SLC chassis until all power dissipates from the
SLC 500 power supply (approximately 10 seconds).
AB Parts