Allen-Bradley 1606-XLS960F-3, Reference Manual, Page: 1 / 28

Reference Manual
Bulletin 1606 Switched Mode Power Supplies
Catalog Number: 1606-XLS960F-3
Index
e g a P e g a P
1.
Intended Use .......................................................3
2. Installation Requirements...................................3
3. AC-Input...............................................................4
4. Input Inrush Current ...........................................5
5. DC-Input...............................................................5
6 . Output ................................................................. 6
7. Hold-up Time.......................................................8
8. DC-OK Relay Contact .......................................... 9
9 . Shut-down Input ................................................. 9
10. Remote Control of Output Volta g e .................10
11. Internal Data Lo gg in g .......................................10
12. Efficiency and Power Losses..............................11
13. Lifetime Expectancy and MTBF.........................12
14. Functional Dia
g ram...........................................12
15. Terminals and Wirin g ........................................13
1 6 . Front Side and User Elements...........................14
17. EMC....................................................................15
18. Environment ......................................................1
6
1 9 . Protection Features ...........................................17
20. Safety Features ..................................................17
21. Dielectric Stren
g th ............................................18
22. Certifications
................................................ 18
23. Physical Dimensions and Wei g ht ..................... 1 9
24. Accessories ........................................................ 20
24.1. 1 6 0 6 -XLC - Wall mountin g b racket ............20
24.2. 1 6 0 6 -XLSBUFFER48 module ........................20
25. Application Notes ............................................. 21
25.1. Repetitive Pulse Loadin g ..........................21
25.2. Peak Current Capa b ility ...........................22
25.3. External Input Protection .........................22
25.4. Usin
g only 2 Le g s of a 3-Phase System ....23
25.5. Char g in g of Batteries ...............................24
25. 6 . Output Circuit Breakers ............................24
25.7. Parallel Use to Increase Output Power ....25
25.8. Parallel Use for Redundancy ....................25
25.
9 . Series Operation .......................................2 6
25.10. Inductive and Capacitive Loads ................2 6
25.11. Back-feedin g Loads ..................................2 6
25.12. Use in a Ti g htly Sealed Enclosure ............2 6
25.13. Mountin g Orientations ............................27
• PE and symbol— PE is the abbreviation for P rotective E arth and has the same meaning as the symbol .
• Earth, Ground— This document uses the term “earth” which is the same as the U.S. term “ground”.
• T.b.d.— To be defined, value or description will follow later.
• AC 230V— A figure displayed with the AC or DC before the value represents a nominal voltage with standard tolerances (usually ±15%)
included. E.g.: DC 12V describes a 12V battery disregarding whether it is full (13.7V) or flat (10V)
• 230Vac —A figure with the unit (Vac) at the end is a momentary figure without any additional tolerances included.
• 50Hz vs. 60Hz —As long as not otherwise stated, AC100V and AC230V parameters are valid at 50Hz and AC120V parameters are valid at 60Hz
mains frequency.
• may —A key word indicating flexibility of choice with no implied preference.
• shall —A key word indicating a mandatory requirement.
• should —A key word indicating flexibility of choice with a strongly preferred implementation.
Terminology and Abbreviations