Allen-Bradley 1606-XLS960E-3 Reference Manual Download Page 28

Rockwell Automation Support

Rockwell Automation provides technical information on the Web to assist you in using its products. 
At 

http://www.rockwellautomation.com/support

, you can find technical manuals, technical and application 

notes, sample code and links to software service packs, and a MySupport feature that you can customize to 
make the best use of these tools. You can also visit our Knowledgebase at 

http://

www.rockwellautomation.com/knowledgebase

 for FAQs, technical information, support chat and forums, 

software updates, and to sign up for product notification updates.

For an additional level of technical phone support for installation, configuration, and troubleshooting, we offer 
TechConnect

SM

 support programs. For more information, contact your local distributor or Rockwell Automation 

representative, or visit  

http://www.rockwellautomation.com/support/

.

Installation Assistance

If you experience a problem within the first 24 hours of installation, review the information that is contained in 
this manual. You can contact Customer Support for initial help in getting your product up and running.

New Product Satisfaction Return

Rockwell Automation tests all of its products to help ensure that they are fully operational when shipped from 
the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these 
procedures.

Documentation Feedback 

Your comments will help us serve your documentation needs better. If you have any suggestions on how to 
improve this document, complete this form, publication 

RA-DU002

, available at 

http://

literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf/
www.rockwellautomation.com/literature/

.

United States or Canada

1.440.646.3434

Outside United States or Canada

Use the 

Worldwide Locator

 at 

http://www.rockwellautomation.com/rockwellautomation/support/overview.page

, or contact your local 

Rockwell Automation representative.

United States

Contact your distributor. You must provide a Customer Support case number (call the phone number above to obtain one) to your 
distributor to complete the return process.

Outside United States

Please contact your local Rockwell Automation representative for the return procedure.

Publication 1606-RM006A-EN-P - February 2014

Copyright © 2014 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

Summary of Contents for 1606-XLS960E-3





























Reviews: