Allen-Bradley 1606-XLB480E, Manual, Page: 14 / 26

14 Rockwell Automation Publication 1606-RM104A-EN-P - July 2020
Electromagnetic
Compatibility
The EMC behavior of the device is designed for applications in industrial,
residential, commercial, and light-industrial environments.
The device complies with EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN
61000-6-4, EN 61000-3-2, and EN 61000-3-3.
Without additional measures to reduce the conducted emissions on the output
(for example by using a filter), the device is not suited to supply a local DC
power network in industrial, residential, commercial, and light-industrial
environments.
EMC Immunity
Performance
Criterion
Electrostatic discharge EN 61000-4-2
Contact discharge 8 kV Criterion A
Air discharge 8 kV Criterion A
Electromagnetic RF field EN 61000-4-3 80 MHz…2.7 GHz 20V/m Criterion A
Fast transients (Burst) EN 61000-4-4
Input lines 4 kV Criterion A
Output lines 2 kV Criterion A
DC OK signal (coupling
clamp)
2 kV Criterion A
Surge voltage on input EN 61000-4-5
L

N 2 kV Criterion A
L

PE, N

PE 4 kV Criterion A
Surge voltage on output EN 61000-4-5
+

- 1 kV Criterion A
+ / -

PE 2 kV Criterion A
Surge voltage on DC OK EN 61000-4-5 DC OK signal

PE 1 kV Criterion A
Conducted disturbance EN 61000-4-6 0.15…80 MHz 20V Criterion A
Mains voltage dips EN 61000-4-11
0% of 100V AC 0V AC, 20 ms Criterion A
40% of 100V AC 40V AC, 200 ms Criterion C
70% of 100V AC 70V AC, 500 ms Criterion A
0% of 200V AC 0V AC, 20 ms Criterion A
40% of 200V AC 80V AC, 200 ms Criterion A
70% of 200V AC 140V AC, 500 ms Criterion A
Voltage interruptions EN 61000-4-11 0V 5000 ms Criterion C
Powerful transients VDE 0160 Over entire load range 750V, 0.3 ms Criterion A
Performance
Criterion
Description
A The device shows normal operation behavior within the defined limits.
C
Temporary loss of function is possible. The device may shut down and
restarts by itself. No damage or hazards for the device occur.
EMC Emission
Conducted emission input lines
EN 55011, EN 55022, FCC Part 15,
CISPR 11, CISPR 22
Class B
Conducted emission output lines IEC/CISPR 16-1-2, IEC/CISPR 16-2-1
Limits for DC power port acc. EN
61000-6-3 not fulfilled
Radiated emission EN 55011, EN 55022 Class B
Harmonic input current EN 61000-3-2 Fulfilled, Class A limits
Voltage fluctuations, flicker EN 61000-3-3
Fulfilled
,
tested with constant current
loads, non-pulsing
This device complies with FCC Part 15 rules.
Operation is subjected to following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.