ALLEN & HEATH Zed Power 1000, User Manual

Page: 8 / 40

Allen & Heath 8 ZED POWER 1000

!
General Precautions:
Damage :
To prevent damage to the controls and cosmetics avoid placing
heavy objects on the control surface, scratching the surface
with sharp objects, or rough handling and vibration.
Environment :
Protect from excessive dirt, dust, heat and vibration when oper-
ating and storing. Avoid tobacco ash, smoke, drinks spillage,
and exposure to rain and moisture. If the console becomes
wet, switch off and remove mains power immediately. Allow to
dry out thoroughly before using again.
Cleaning :
Avoid the use of chemicals, abrasives or solvents. The control
panel is best cleaned with a soft brush and dry lint-free cloth.
The faders, switches and potentiometers are lubricated for life.
The use of electrical lubricants on these parts is not recom-
mended. The fader and potentiometer knobs may be removed
for cleaning with a warm soapy solution. Rinse and allow to
dry fully before refitting them.
Transporting :
Protect the controls from damage during transit. Use adequate
packing if you need to ship the unit.
Hearing :
To avoid damage to your hearing do not operate any sound
system at excessively high volume. This applies particularly to
close-to-ear monitoring such as headphones and in-ear sys-
tems. Continued exposure to high volume sound can cause
frequency selective or wide range hearing loss.
SAFETY INSTRUCTIONS