ALLEN & HEATH Zed Power 1000, User Manual

Page: 6 / 40

Allen & Heath 6 ZED POWER 1000
WARNING - Read the following before proceeding :
WARNING - THIS APPARATUS MUST BE EARTHED.
CAUTION - HOT SURFACE, AVOID CONTACT.
CAUTION
Made in the UK by ALLEN & HEATH
SERIAL No:
T 3.15A 20mm 220 - 240V~
T 5.0A 20mm 100 - 120V~
FUSE TYPE AC SUPPLY
47-63Hz
320VA MAX
300W MAX
AC MAINS IN ~
ATTENTION: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR
Read instructions:
Retain these safety and operating instructions for future
reference. Adhere to all warnings printed here and on
the console. Follow the operating instructions printed in
this User Guide.
Do not remove cover:
Operate the console with its covers correctly fitted.
Power sources:
Connect the console to a mains power unit only of the
type described in this User Guide and marked on the
rear panel. Use the power cord with sealed mains plug
appropriate for your local mains supply as provided
with the console. If the provided plug does not fit into
your outlet consult your service agent for assistance.
Power cord routing:
Route the power cord so that it is not likely to be walked
on, stretched or pinched by items placed upon or
against it.
Grounding:
Do not defeat the grounding and polarisation means of
the power cord plug. Do not remove or tamper with the
ground connection in the power cord.
!
WARNING: This equipment must be earthed.
SAFETY INSTRUCTIONS