ALLEN
&
HEATH
50 AP10733_1_XONE:PX5 User Guide
REPLACING THE FADERS continued
Step 1:
Ensure power switch on the mixer’s rear panel is turned OFF.
Disconnect the mains cable from AC mains supply and mixer’s IEC socket.
Step 2:
Remove and retain 1 Torx screw securing, RECORD, RCA sockets to the rear panel
[
i
]
.
Remove and retain 2 Torx screws securing the rear panel MIC, XLR socket
[
ii
]
.
Remove and retain 4 Torx screws between LINE and PHONO RCA sockets on rear panel
[
iii
]
.
Remove and retain 4 circular nuts securing, EXT RTN / FX SEND, TRS (1/4” Jack) sockets
[
iv
]
.
Step 3:
Remove and retain 8 Torx screws securing top panel to the mixer chassis
[
v
]
.
Step 4:
Lift the front edge of the top panel up from the chassis, as illustrated above, to access and
disconnect the internal harnesses (see below).
NOTE: Do not yet attempt to completely separate the top panel and chassis.
[
v
]
[
v
]
[
v
]
[
v
]
[
v
]
[
v
]
[
v
]
[
v
]
[ii]
[
i
]
[
iii
]
[
iv
]
