Allen & Heath 18 XONE:42 User Guide
Crossfader
This lets you fade between signals routed to either side, typically to fade
smoothly into a new music track or to creatively layer sounds when scratch or
cut mixing.
The crossfader is a VCA controller which affects the level of signals routed via
the filters. Make sure the toggle switches on the channels you wish to fade are
set to X or Y as appropriate.
Please contact your Allen and Heath approved service centre for crossfader ser-
vice or replacement.
CROSSFADER
3
2
1
3
Crossfader Curve Control
This control adjusts the crossfader curve between dipped response, ideal for
seamless beat mixing, and fast-attack, suitable for scratch or cut mixing.
2
Crossfader On Switch
In its normal (out) position the crossfader is active. Push the switch to turn the
crossfader off—the channel LED indication will also be switched off.
1
