background image

 

  

 

Limited One Year Warranty 

 

 
This product is warranted to be free from defects in materials or 

workmanship for period of one year from the date of purchase by the 

original owner. 
To ensure a high level of performance and reliability for which this 

equipment has been designed and manufactured, read this User Guide 

before operating.  In the event of a failure, notify and return the 

defective unit to ALLEN & HEATH Limited or its authorised agent as 

soon as possible for repair under warranty subject to the following 

conditions 

Conditions Of Warranty

 

 

The equipment has been installed and operated in accordance with the 

instructions in this User Guide. 
The equipment has not been subject to misuse either intended or 

accidental, neglect, or alteration other than as described in the User 

Guide or Service Manual, or approved by ALLEN & HEATH. 
Any necessary adjustment, alteration or repair has been carried out by 

ALLEN & HEATH or its authorised agent. 
This warranty does not cover fader wear and tear. 
The defective unit is to be returned carriage prepaid to ALLEN & 

HEATH or its authorised agent with proof of purchase. 
Units returned should be packed to avoid transit damage. 
 In certain territories the terms may vary.  Check with your ALLEN & 

HEATH agent for any additional warranty which may apply. 

 

This product complies with the European Electromagnetic 

Compatibility directives 2004/108/EC and the European Low Voltage 

directives 2006/95/EC. 

Any changes or  modifications to the equipment not approved by Allen & 

Heath could void the compliance of the product and therefore the users 

authority to operate it. 

XONE:23 User Guide AP9250 Issue 1 

Copyright © 2014 Allen & Heath Limited.  All rights reserved 

Allen & Heath Limited 

Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK 

http://www.allen-heath.com   http://www.xone.co.uk 

Summary of Contents for Xone:23
























Reviews: