ALLEN & HEATH ML5000 Service Manual Download Page 35

Page: 35 / 135

ML5000

Service Manual

ORDERING A CONSOLE

To order a new console please specify the model number and AC mains voltage for the Power Supply.

MODEL DESCRIPTION

ORDER

CODE

ML5000-32

32 Mono + 4 Stereo Input Channels

ML5000-32

ML5000-40

40 Mono + 4 Stereo Input Channels

ML5000-40

ML5000-48

48 Mono + 4 Stereo Input Channels

ML5000-48

MPS14

Power Supply for ML5000

MPS14/*

* - Specify the voltage and mains plug requirement for your area.

ORDERING AN ACCESSORY

To order an option please specify the model number required.

MODEL DESCRIPTION

ORDER

CODE

SIDECAR EXPANDER

OPTIONAL 24 MONO INPUT SIDECAR

ML5000-24SC

DC POWER LEAD

2.9 METRE DC POWER LEAD

002-583

DC COMBINER LEAD

0.75 METRE DC COMBINER LEAD

002-584

SYS-LINK CABLE

2.8 METRE 37 WAY AUDIO CABLE

002-617

LOGIC CABLE

2.9 METRE 9 WAY LOGIC CABLE

AL4155

GOOSENECK LAMP

18” GOOSENECK LAMP

AL4061

32 CHANNEL DUSTCOVER

32 CHANNEL VINYL DUSTCOVER

AP4121

40 CHANNEL DUSTCOVER

40 CHANNEL VINYL DUSTCOVER

AP4122

48 CHANNEL DUSTCOVER

48 CHANNEL VINYL DUSTCOVER

AP4123

SIDE-CAR DUSTCOVER

SIDECAR VINYL DUSTCOVER

AP4234

MANUALS AND SUPPORT DOCUMENTATION

MODEL DESCRIPTION

ORDER

CODE

ML5000

User Guide

AP3736

ML5000 SIDECAR

User Guide

AP4124

MPS14 POWER SUPPLY

User Guide

AP3898

SERVICE TOOLS

The tools required to service the

ML5000

are standard to an electronics service workshop and are

easily obtainable. The following items are necessary for disassembly and service access:

TOOL USE

ORDER

CODE

4mm Hexagon (Allen) key

M6 side trim

AT0033

1-point Crosshead screwdriver

M3, 4AB

AT0004

2-point Crosshead screwdriver

M4, 6AB, 8B

AT0002

11mm AF Nutdriver

Potentiometer and headphone nuts

12mm Nutdriver

Jack nuts

1.27mm Hexagon (Allen) key

PSU DC Leads

AT4142

2.5MM hexagon (Allen) key

M4 Sidetrim

5.5mm AF Spanner

Fader PCB M3 Hex

5mm Nutspinner

D-Type Screws

Summary of Contents for ML5000








































































































































Search results

Summary of Contents for ML5000

Reviews:

Related manuals for ML5000

Brands by name

Popular brands

ALLEN & HEATH ML5000, Service Manual

Search results

Summary of Contents for ML5000

Reviews:

Related manuals for ML5000

Brands by name

Popular brands