User Guide – AP9209_1
14
ALLEN
&
HEATH
8.5
System Setup page
Use this page to access ME-U system
settings:
ME-U IP Settings
– Displays the current
network static TCP/IP settings. You can
change these if you wish to access the ME-U
via a different network.
Default settings can be restored using the
front panel recessed ‘Reset’ switch.
IP address = 192.168.1.40
Subnet Mask = 255.255.255.0
Default Gateway = 192.168.1.254
If you are using the Network port to
receive names from an iLive system then
make sure the ME-U and iLive network
addresses are compatible.
if you are not sure how to set these
settings then refer to your IT administrator.
Host MAC Address
– This is the permanent
address assigned to the ME-U hardware.
dSNAKE MAC Address
– This is the
permanent address assigned to the input
card found in the Input Port.
Source Mode
– If you are using ME-U with an
iLive system and connecting its network to
receive its names and stereo link status then
tick the iLive mode box.
If you are not connecting to an iLive
system then make sure the box is not
ticked. Failure to do so may result in the
ME-U being unable to find names from the
connected system.
iDR Mix Rack Selection
– The ‘Found Units’
list shows any iDR racks found on the
network. Choose the rack to connect to.
The ‘iDR Mix Rack’ box shows the name of
the iLive iDR rack the ME-U looks for when
starting.
This setting is only used if iLive Source Mode
has been selected.
Default
- Restores the factory default iDR Mix
Rack name.
If you make changes to the settings click
‘Save’ to confirm or ‘Cancel’ to restore the
previous settings.
