ALLEN & HEATH ME U User Manual Download Page 11

 

            

User Guide – AP9209_1   

 

 

   11

        

 

 

                      

ALLEN

&

HEATH

 

6.11

 

 Input source - Aviom

®

 A-Net 16 

Using the standard ME-D input card. 

 

Use the ME-U to connect to ME-1 mixers 

only. It is not intended for nor compatible 
with Aviom

®

 mixers. 

 
   
 
 
 
 
 
 
The Aviom

®

 source can send: 

 

16 audio channels 

 

Stereo link information 

No channel names 
 
Use the 

ME-U Setup Application

 

Received names  

 

Received stereo links  

 

Manual names and stereo links  

 

iLive Source Mode  

 (

turn this off

 
The ME-U gets its audio and link information 
from Aviom

®

 channels 1-16. 

 
6.12

 

Input source – Other systems 

Fit a Dante, MADI or EtherSound card to 

interface other mix systems to the ME-U 
(

48kHz only

). 

 
The source can send: 

 

Up to 40 audio channels 

No stereo link information 
No channel names 
 
Use the 

ME-U Setup Application

 

Received names and stereo links  

 

 

Manual names and stereo links  

 

iLive Source Mode  

 (

turn this off

 
Option card inputs 1-40 are used to feed the 
ME-1 mixers. 

 

ME-D standard card  

Any Aviom® A-Net 16 source 

Summary of Contents for ME U



















Reviews: