iDR-in/out
User Guide AP4774
1
iDR-in
and
iDR-out
are add-on audio expander units for the Allen & Heath
iDR-4
and
iDR-8
audio mix processors.
They provide additional analogue audio inputs and outputs to add to those on the main unit. The
iDR-in
has 8 mic/line
inputs, the
iDR-out
has 8 line outputs. One or both may be connected to the
iDR
. Only one of each may be added to
the iDR system bringing it up to a maximum 16x16 audio matrix. These units do not have any processing built in. They
simply convert between analogue and digital audio to work with an 8 channel wide digital bus which feeds the main
unit via a CAT5 STP cable. The
iDR-in
features high grade mic/line preamps with PC configured gain, pad and
phantom power switching, and a built-in soft clip limiter. The
iDR-out
provides electronically balanced differential
outputs. The processing is available on the main
iDR-4
or
iDR-8
unit which features the full 16x16 DSP matrix. Both
units have 8 front panel LEDs in addition to the 3 status indicators. These are 3-colour soft LEDs which can be
assigned as audio meters, mute indicators or patch related indicators. They are programmed in the usual way using
the iDR System Manager software. Control of the expanders is via the DR-Link port using a CAT5 STP cable. This
means that two CAT5 cables are required to interconnect an expander to the main unit. Maximum distance between
the units is 250 metres. Local mains power is required.
This product complies with the European Electromagnetic
Compatibility directives 89/336/EEC & 92/31/EEC and the
European Low Voltage Directives 73/23/EEC & 93/68/EEC.
NOTE:
Do not remove the cover of the unit. There are no user serviceable
parts inside. Any changes or modifications to the equipment not approved by
Allen & Heath could void the compliance of the equipment and therefore the
users authority to operate it.
iDR-in/out User Guide AP4774 Issue 2
Copyright © 2003 Allen & Heath Limited. All rights reserved
Whilst we believe the information in this guide to be reliable we do not assume
responsibility for inaccuracies. We also reserve the right to make changes in
the interest of further product development.
iDR-in/out EXPANDER
AP4774
User Guide
AUDIO INPUT EXPANDER
power
lock
link
iDR-in
lock
link
power
AUDIO OUTPUT EXPANDER
iDR-out
Made in the UK by ALLEN&HEATH LIMITED
AUDIO OUT
CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE FUSE WITH SAME TYPE AND RATING.
ATTENTION: REMPLACER LE FUSIBLE AVEC UN DES MEMES CARACTERISTIQUES.
47-63Hz ~ 25W MAX
100 - 240V~
THIS APPARATUS MUST BE EARTHED.
WARNING
SERIAL NUMBER
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
FUSE: T500mAL
next
OUT DR-LINK
previous
IN
IN 2
Complies with UL6500, CSA-E65, EN60065
IN 8
IN 7
MIC/LINE INPUTS
IN 6
IN 5
IN 3
IN 4
IN 1
AUDIO IN
Made in the UK by ALLEN&HEATH LIMITED
CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE FUSE WITH SAME TYPE AND RATING.
ATTENTION: REMPLACER LE FUSIBLE AVEC UN DES MEMES CARACTERISTIQUES.
THIS APPARATUS MUST BE EARTHED.
WARNING
47-63Hz ~ 25W MAX
100 - 240V~
SERIAL NUMBER
FUSE: T500mAL
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
next
OUT DR-LINK
previous
IN
OUT 2
Complies with UL6500, CSA-E65, EN60065
OUT 8
OUT 7
LINE OUTPUTS
OUT 6
OUT 5
OUT 3
OUT 4
OUT 1
DIGITAL EXPANDER
DIGITAL EXPANDER
EXPANDER INPUTS
EXPANDER OUTPUTS
