background image

Damage resulting from carrier handling abuse is not covered by product warranty.  Protect your 

interest - inspect product immediately.  The following warranty is made in lieu of all other warranties 
expressed, implied, or statutory, including but not limited to, the implied warranties of merchantability 
and fitness for purpose.  It is in lieu of any implied warranty of merchantability, fitness for a particular 
purpose, or other warranty of quality, except of title, and against patent infringement. 
 

In the event that this ALLEGRO INDUSTRIES product is found to be defective in material or 

workmanship, or not in conformance with any expressed warranty for a specific purpose, ALLEGRO's 
only obligation, and your exclusive remedy, shall be to repair, replace, or refund the purchase price of 
such parts or products upon timely notification, not to exceed 1 year from date of purchase, and 
substantiation that the product has been stored, maintained and used in accordance with ALLEGRO 
INDUSTRIES written instructions.  (Disposable hoods excluded.)  Maximum liability is in no case to 
exceed the value of the ALLEGRO INDUSTRIES unit involved. 

 
LIMITATION OF LIABILITY: 

Except as provided above, ALLEGRO INDUSTRIES shall not be 

liable or responsible for any loss or damage, whether direct, indirect, incidental, special, or 
consequential, arising out of sale, use, or misuse of ALLEGRO INDUSTRIES' products, or the user's 
inability to use such products. 
 

Refer to this Users Manual for proper use. 

Transportation charges in all cases will be at customer expense. 

THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE. 

FOR MORE INFORMATION ON OR ASSISTANCE WITH 

ALLEGRO INDUSTRIES PRODUCTS, OR FOR OUR PARTS CATALOG, CONTACT ALLEGRO 

TECHNICAL SERVICE TOLL FREE AT 1-800 –622-3530 OR [email protected]

 

 
 

RETURN POLICY

 

 
NOTE: THE FOLLOWING REQUIREMENTS MUST BE FOLLOWED IN RETURNING 
GOODS OR PRODUCTS TO ALLEGRO INDUSTRIES: 
 

1) 

ALLEGRO INDUSTRIES requires that you obtain a Return Merchandise Authorization Number 
(RMA#) prior to returning merchandise to us.  This number can be obtained by calling ALLEGRO 
INDUSTRIES Customer Service at (800) 622-3530, or by requesting it in writing.  Note: Products 
returned to ALLEGRO INDUSTRIES without a Returned Merchandise Authorization number will 
not be accepted and/or processed until one is acquired.

 

2) 

Before returning the product, decontaminate and clean it to remove any hazardous materials which 
may have settled on the product during use.  Products suspected of asbestos and/or other dangerous 
contamination will be refused and returned freight collect. 

 

3)  The products or components must be returned to ALLEGRO INDUSTRIES freight prepaid, with the 

RMA number marked clearly on the outside of the package.  

 
 
 
 

9910LPUIRf.DOC 

REV. F, 11/03

 

 

 
 

Summary of Contents for 9910 Series













Reviews: