16
Function groups
Function groups
Manual ADQ-51 Rev. 1.0
3.4.2 Programming
The output ports (DO_x) can be programmed independently. The port direction is determined
by the hardware.
3.4.2.1 Single value output
In this operating mode you can output one digital value each in the respective port width.
Note: An output port can also be read back! Please observe the procedure as described in the
online help.
3.4.2.2 Overloading the outputs
If the output stage is overloaded, the respective port is automatically switched off. Follow the
procedure as described in the online help.
