Determine if you need to install the Monitor Bracket Extensions (e,f) onto the Monitor Brackets (b,c) by placing a Monitor
Bracket on the back of the TV. If the hole pattern on the back of the TV falls within the vertical reach of the Monitor Bracket,
you do not need to install the Monitor Bracket Extensions. Proceed to Step 2.
Note: Both Monitor Bracket Extensions must either be used for each arm or none should be used at all
To install the Monitor Bracket Extensions (e,f) place the threaded stud portion through the Monitor Bracket (b,c). Slide a
Metal Washer (g) onto the threaded stud, and secure the Monitor Bracket Extension by threading and tightening a Nut (h)
onto each threaded stud. The Monitor Bracket Extensions can be adjusted to the correct height. The Diagrams below show
the maximum extension. Both threaded studs on each Monitor Bracket Extension must pass through the Monitor Bracket
to ensure a safe installation!
Configure the Monitor Brackets
Step 2A
Diagram 1
First of all, make sure the diameter of the Bolt(i,j,k,l) your TV requires. Once you have determined the correct diameter,
please see the relative diagram as below. You will thread the Bolt into the TV using the correct Lock Washer(q,r,s,t) and
Washer(w,x). Please make sure the Monitor Brackets(b,c) are vertically centered and level with each other.
3
Mounting the Monitor Brackets to a TV with Flat Back
Step 1
M5 Diameter Bolt
M8 Diameter Bolt
M6 Diameter Bolt
M10 Diameter Bolt
Diagram 2A
i
j
k
l
q
r
s
t
w
x
x
x
b
b
c
c
Monitor Bracket
Details View
Monitor Bracket
Extensions installed
threaded stud
g
h
b,c
e
f
f
