background image

www.allavino.com 

1-800-710-9939 

 This wine cellar has 5 sliding shelves that can hold up to 9 bottles each and a stationary shelf that holds an additional 6 
bottles for a maximum bottle capacity of 51 bottles.  The maximum capacity is based on the standard Bordeaux size 
bottle.  Your total bottle capacity may vary depending upon the size of the bottles in your collection.  Refer to the 
information below for more specific information about how bottle sizes may affect your total bottle count. 

 

 
 

 
The above bottle capacities are based on the standard Bordeaux bottle. The shelves are removable so you can take one 
out to accommodate larger bottle sizes, however, this will also affect the overall capacity. 
 
 

 
 
 

 
To reach the stated bottle capacity, the sliding 
shelves can hold up to 9 bottles alternating the 
necks in the middle of the shelf, as shown in the 
upper image to the right. The stationary shelf at the 
bottom will hold 6 bottles for a total capacity of 51. 
With this configuration, not every bottle will be 
cradled between the slats so there may be some 
shifting when you remove a bottle from the rack. 
 

 

You can fit 6 bottles across on each sliding shelf so 
that each bottle will be cradled between the slats 
and will not move. There is enough room in front of 
the bottles to store and additional 2 bottles, for a 
total of 8 per sliding shelf. The two front bottles will 
not be cradled and may shift as you move the 
shelves in and out. This configuration will reduce the 
overall bottle capacity to 46. 
 

 

Summary of Contents for MWR-1212











Reviews: