9
#
8 3 2 1
6 8 5 4
---------
---------
Output 1 activates for 1 second
Output 2 Starts or Stops (toggle mode)
#
8 3 2 1
---------
Output 1 activates for 1 second
8 3 2 1
---------
Output 2 Starts or Stops (toggle mode)
#
#
1
2
3) Operat e t he Keypad –
Taking the data programmed above and other features in default value as reference
a) To command an output, enter it’s user code. Press is not required.
b) The Personal Master Code is a Super User Code to control the outputs. This feature allows
the owner to use only one code to operate several keypads if they have the same
Master Code but different User codes. Enter the personal Master Code and validate via
the key and corresponding output number.
3 2 8 9
---
Lockout is reset and keypad resumes normal operation
* *
* *
c) Enter false codes into the keypad to test the security. The keypad considers 4 digits as
1 code and it generates 5 beeps for each unsuccessful entry. The keypad will lock for 15
minutes after 10 unsuccessful code entries. Normal operation will resume after 15 minutes
have expired or it may be reset with the Master User Code at any time during lockout.
pause
C) Mult i-User Operat ion – Operation Example
The following steps are an example only
1) Requirement
a) Multi-User Mode Operation
b) Change factory set Master Code “0000” to a Personal Master Code “3289”.
c) Set 1
st
User Code in Group 1 of 8321
d) Set 2
nd
User Code in Group 1 of 1122
e) Set 3
rd
User Code in Group 1 of 3333
f) Set 1
st
User Code in Group 2 of 6854
g) Set 2
nd
User Code in Group 2 of 5432
h) Set Output 1 to Momentary Mode, 1 second duration
i) Set Output 2 to Start / Stop Mode
j) Set the keypad to lock for 15 minutes after 10 successive false codes
Summary of Contents for ASE-KP1000EGRESS
Page 18: ...17...