Page
10
HW-FN-003-0020
2
x
HW-FN-002-0001
14
x
0
7a
PEDAL MOUNT ASSEMBLY
- USING THE PIVOT METHOD
Place one T-nut in the center top
slot wit
h
1 on each side 12
inches from the center T-nut
Align the center T-nut with the
center hole of the the pedal
mount and tighten with a screw
Slide in the remaining T-nuts
so that they align with the
red circles as indicated in the
photo
.
**Repeat the same steps for
the opposite side.
2
x
MT-PP-001
The pedal plates can be mounted either freestyle
(step 7c)
or using the center hole as a pivot if
you want to easily rotate your pedal angle
.
