Electrical Requirements
The installation site should be prewired for proper electrical power to the machine prior to
installation.
Typically, voltage, phase, & frequency are customer specified upon purchase of the
machine. These electrical requirements are listed on a tag attached to the machine, and on
the wiring diagram supplied with the machine. Consult this information to determine the
electrical requirements at your site.
As standard, the Model VF100e can be selected with the following power characteristics:
● 120v, single phase, 60 Hz.
● 220v, single phase, 60 Hz.
Pneumatic Requirements
The Model VF100e does not require compressed air, however, certain accessories and
options (e.g., conveyor indexing, plungers, etc.) may be required If pneumatically-operated
equipment is used with the Model VF100e, the installation site should include a source of
compressed air before installing or operating the Model VF100e.
Product Supply Requirements
A consistent, reliable source of product to be available to refill the hopper of the filler is cru-
cial to accuracy and overall operation of the machine. Before starting any installation, the
site should be evaluated in terms of the availability of product re-supply to the hopper.
Product should be supplied to be within 2”-3” of the top of the hopper to maintain proper
pressure. Product may be either flood-fed into the hopper, or periodically re-supplied by
means of other equipment. ALL-FILL offers a wide variety of options to ensure a consistent
source of product re-supply, including hopper-mounted Level Controls, Horizontal & Inclined
screwfeeders, etc., depending on the site, product, and accuracy levels required.
Model VF100e Vibratory Feeder Installation & Maintenance Manual
13
AFI Publication 1920118
•
Issue: 1
•
January 2018
Summary of Contents for VF100e
Page 2: ......
