20
The bowl does not drain.
The oil is still too hot.
Wait for the temperature to go down
(approximately 2 hours).
The oil box control switch is not on the
automatic oil filtration position.
Turn the oil box control switch on the
automatic oil filtration position.
The filter grid is blocked or clogged.
Empty the oil into a container and clean the
filter grid with soap and water and a non-
metallic brush.
Press on the filtration valve under the fryer
to let out water and crumbs.
The shortening is solidified.
Allow the fryer to heat (4 to 5 minutes).
Oil leaks.
The MAX (3.5L) fill mark for the bowl
has been exceeded.
Do not exceed the oil level (3.5L). Clean the
fryer before any use.
There is some oil left in the oil box or
it is full.
Turn the oil box control button on the oil
box position, pull out the oil box and drain
it.
Emits unpleasant smells.
The oil has deteriorated.
Use new oil.
The oil is unsuitable.
Use a good quality blended vegetable oil.
Summary of Contents for EZ CLEAN NC00142377
