)IW
SAFETY
INSTRUCTIONS
A
DIG,TAL
WATER
IONIZER
AK
If the unit is immersed in water, pull out the power plug
m
immediately and then take the unit out of the water.
--
^
Avoid an electric circuit overload an outlet or electric wiring.
Connect the unit power plug to the corresponding AC voltage outlet.
>
Ensuring the unit is connected directly and solely to a power supply will avoid
overloading the appliance and reduce risk.
^
t,epower
plug withwet hands when plugging or unpugging
A
Completely plug in the power cord for stable fitting
A
>
If the plug-in fitting is not stable, it may cause an electric shock or
fire by overheating.
> Do not use a damaged plug or unstable wall outlet.
^
If the supplied cord is damaged, it must be replaced by the manufacturer,
IfBIfl
its service agent, or qualified persons. Please refer to this condition to
your salesperson and enforce manufacturer's warranty as per the warranty
card instructions.
A8kh
Do not install the unit in freezing temperatures or near any fire source.
>
Correct environment temperature range:
10o- 35oC (50o- 95oF)
Correct inflow water temperature:
5o-
35oC (41o- 95oF)
I..\
Do not install the unit in direct sunlight.
(
!
)
>
Extreme environmental exposure may cause the exterior unit body to discolor and
W
may cause the entire unit to warp/twist the casing. This may result in mechanical failure.
(
!
)
Always install the unit on a level surface"
u
Do not place anything heavy on top of the unit.
_________________
\
SS
