A
DIG/ITAL
WATER
IONIZER
Connection to Faucet
@ Remove aerator from faucet.
Note : Pliers may be required.
Faucet Type : External Screwed
Faucet Type : Internal Screwed
Faucet
Aerator
ON/OFF Swivel
Faucet
Aerator
Adaptor (optional,
ON/OFF Swivel
(b) If reqired, attach adaptor (2 sizes of adaptor are supplied for use supplied for use) before attaching water faucet diverter
to faucet.
@ Remove compression nut on the side of water faucet diverter, attach Source Water Inlet Hose and tighten nut.
@
Connect the hose to Acidic
Drain Water Outlet Port and cut the other end
of the hose to have sufficient length to reach the sink fc
away acidic water or for connecting to an Drain Water
(Option : Hose-fixation holder can be used for convenience),
|
I
Drain Water Outlet Hose Holder
b In case Drain Water Outlet is steeped in water in a receptacle or the hose is unnecessarily long,
an outflow rate of ionized water might be suspended, For this reason, maintain a shorter hose
length to allow natural flow rate for drainage.
> Do not lift Drain Water Outlet hose up to the height of the installed unit. Otherwise this will hinder
the drainage from the unit and may cause internal damage to the unit.
B;
GATEIT;LI
Q N IZ E R
