Alinko DJ-S45 CQ Instruction Manual Download Page 7

Page: 7 / 48

1. Functions and Features

39 different Tone Squelch function (CTCSS)
TOT (Time Out Timer) function
Tone Call function (ALT, 1750, 2100, 1000, 1450Hz)
Reception Bell (Beeper) function

3 types of Scan function (VFO, Memory, Tone)
4 types of Scan function (LPD (VFO),
Memory, Tone, PMR)

Cable Cloning
Rain Proof

1-1 Standard Accessories

・

Belt Clip (with a screw)

・

Hand Strap

・

Instruction Manual

The accessory status may vary depending on the versions. Please

consult with your local dealer for details.

■

DJ-S45 CQ

DJ-S45 T/E

■

1.Functions and Features

Caution

Insert the rubber covers properly and firmly into the jacks of

the external speaker, microphone, and power supply.

Connecting optional accessories to the transceiver disables

the rainproof function.

The

is rainproof but NOT water resistant.

Therefore, NEVER rinse nor immerse it in water.

DJ-S45 CQ/T/E

Summary of Contents for DJ-S45 CQ

















































Search results

Summary of Contents for DJ-S45 CQ

Reviews:

Related manuals for DJ-S45 CQ

Brands by name

Popular brands

Alinko DJ-S45 CQ, Instruction Manual

Search results

Summary of Contents for DJ-S45 CQ

Reviews:

Related manuals for DJ-S45 CQ

Brands by name

Popular brands