18
4-6 Memory Mode
The Memory mode is used to call up on a previously programmed
frequency. This transceiver has 100 memory channels (0~99CH).
4-6-1 Memory Channel Programming
1. Switch to the LPD (VFO) or PMR mode by pressing the V/M key.
2. Select the desired frequency or channel.
3. Press the F key, and then press the V/M
key while the "F" icon appears.
The memory channel No. and the "W"
icon blinks.
4. Select a memory channel to program by pressing the
keys.
Blinking memory channel No. indicates that the channel is not
programmed yet. Illuminating memory channel No. indicates that
the channel is already programmed.
5. Press the V/W key while the "W" icon
blinks.
The selected frequency or channel is
programmed to the memory channel.
▲/▼
Memory Channel No.
4.Basic Operations
4
Caution
Re-editing the memory will overwrite the current data.
Reference :
You can also program channels from the PMR mode
if you purchased the
. Its procedure is
the same as the LPD (VFO) mode.
DJ-S45 CQ
Summary of Contents for DJ-S45 CQ
Page 30: ...29 5 Parameter Setting Mode 5 ...