Aline EMA 308 9173.81 Page 36 Operating Instructions Manual Download

Page: 36 / 36

Declaration of Conformity

Manufacturer:

BLANKOM systems GmbH

Hermann – Petersilge – Straße 1

07422 Bad Blankenburg

Germany

Product Name:

Encoder/ Multiplexer

Type Name:

EMA 308, EMA 407, EMA 408, EMA 508, EMA 608, EMA 708

Type N

9173.81, 9173.82, 9173.91, 9173.92, 9173.93, 9174.71, 9174.72,

9174.81, 9174.82, 9174.91, 9175.81, 9175.82, 9176.81, 9176.82,

9177.81, 9177.82

BLANKOM systems GmbH confirms that the mentioned products meet the guideline(s) of the Council for

the approximation of legislation of the member states.

Electromagnetic compatibility (2004/ 108/ EC)

The following standards are met: DIN EN 50083-2: 2007-04 (EN 50083-2:2006-06)

Low voltage guideline (2006/ 95/ EC)

The following standards are met: DIN EN 60950-1: 2006-04 (EN 60950-1:2006-11)

Information technology equipment -Safety-

Restriction of hazardous substances (2011/ 65/ EC)

The following standards are met:

DIN EN 50581: 2013-02 (EN 50581:2012)

Bad Blankenburg, Germany, 2015-06-22

Wolfgang Schlüter

(Managing Director)

Summary of Contents for EMA 308 9173.81





































Search results

Summary of Contents for EMA 308 9173.81

Reviews:

Related manuals for EMA 308 9173.81

Brands by name

Popular brands

Aline EMA 308 9173.81, Operating Instructions Manual

Search results

Summary of Contents for EMA 308 9173.81

Reviews:

Related manuals for EMA 308 9173.81

Brands by name

Popular brands