Alinco EJ-50U Instruction Manual Download | Manualshive

Page: 34 / 43

background image

34

is only to reduce Y value by 1.

Example: In case of UIFLOOD WIDE, NOID MYCALL W1AAA

W1BBB>GPS,WIDE4-4:Frame 1 -> W1BBB>GPS,WIDE4-3:Frame1
W1BBB>GPS,W1CCC*,WIDE4-3:Frame2 -> W1BBB>GPS,W1CCC*,WIDE4-2:Frame2
W1BBB>GPS,W1CCC*WIDE4-1:Frame 3 -> W1BBB>GPS,W1CCC*,WIDE4:Frame3
(Note that Y=SSID changes 1 to 0)
W1BBB>GPS,W1CCC*,WIDE4:Frame4 -> This in not Name X-Y parameter (Y is 0) thus wont be relayed in
UNFLOOD command.
W1BBB>GPS,WIDE:Frame5 -> Same reason as above, no relay.
W1BBB>GPS,TRACE4-4:Frame6 -> This does not match Name, so no relay.

When FIRST is set, the frame will be relayed if the same relay condition is applied as above. Relay

modification is to reduce Y value by 1, and MYCALL setting callsign with relayed flag will be inserted only when
you become the first relay station.

Example: In the case of UIFLOOD WIDE, FIRST MYCALL W1AAA

W1BBB>GPS,WIDE4-4:Frame 1 -> W1BBB>GPS,W1AAA*,WIDE4-3:Frame1
(MYCALL is inserted because you are the first relay)
W1BBB>GPS,W1CCC*,WIDE4-4:Frame1 -> W1BBB>GPS,W1CCC*,WIDE4-3:Frame1
W1BBB>GPS,W1CCC*WIDE4-3:Frame 2 -> W1BBB>GPS,W1CCC*,WIDE4-2:Frame2
W1BBB>GPS,W1CCC*WIDE4-1:Frame 3 -> W1BBB>GPS,W1CCC*,WIDE4:Frame3
(Note that Y=SSID changes from 1 to 0)
W1BBB>GPS,W1CCC*,WIDE4:Frame4 -> This in not Name X-Y parameter (Y is 0) thus wont be relayed in
UNFLOOD command.
W1BBB>GPS,WIDE:Frame5 -> Same reason as above, no relay.
W1BBB>GPS,TRACE4-4:Frame6 -> This does not match Name, so no relay.

8-3-5 UITRACE command
Abbrev. UIT default. empty range Name
example UIT TRACE or UIT % for empty

Select 5 alphanumeric digits for Name. UITRACE relay won’t become effective if Name is empty. To

intentionally do so, enter Name as %.
When NAME is set, the frames that match all below conditions will be relayed. When it is relayed, the frame will
be processed as below.

Relay condition: Frames that satisfies both

The first UI frame heard within the UICHECK command set time.

The first callsign of the unrelayed station list must be [Name X – Y] parameter.

X,Y should be [1-7] and X value must be greater than Y value (Y is SSID)

Relay modification process

Insert MYCALL set callsign with relayed flag.

Reduces Y value by 1

Example: In case of UITRACE TRACE MYCALL W1AAA

W1BBB>GPS,TRACE4-4:Frame 1 -> W1BBB>GPS,W1AAA*,TRACE4-3:Frame1
W1BBB>GPS,W1CCC*,TRACE4-3:Frame2 >

«
...
32
33
34
35
36
...
»

Summary of Contents for EJ-50U












































Reviews:

No comments

Related manuals for EJ-50U

Brand: Manfrotto Pages: 16

Brand: K1EL Pages: 46

BT300 BurnerTronic

Brand: Lamtec Pages: 48

Brand: WABCO Pages: 4

Brand: Rayrun Pages: 4

Brand: Parker Pages: 29

Brand: ZKTeco Pages: 43

HydroTap G5 Touch-Free Wave

Brand: Zip Pages: 24

Brand: Sunnen Pages: 24

Brand: Automated Logic Pages: 10

Brand: Euromatic Pages: 20

Brand: VMK Pages: 98

AQUIS ULTRAFLOW

Brand: Waterous Pages: 217

Brand: Cypress Pages: 2

Brand: Dudley Pages: 8

PLATINUM PS-9003

Brand: HydroQuip Pages: 24

Infi 90 IMCPM03

Brand: Bailey Pages: 61

Brand: Baby Trend Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands