background image

1

IMPORTANT

•  As a nature of this product, it generates a very high voltage to the antenna 

element and other terminals up to several kilovolts.
For this, some countries apply the height restrictions of such devices for 
installations. At any case install EDX-3 and elements in the way that a person or 
pets can’t access and touch it.

•  Modern vehicles/vessels are made of cutting-edge electronics technology. 

Transmitting RF signals while driving/navigating may cause interferences to those 
electronics devices risking accidents. Be sure to check the safety of operation 
before driving/navigating.
Alinco does not reccomend transmission while driving a vehicle, and declines 
any responsibility for any consequence RF intereference may cause.

WARNING

To prevent any hazard during operation of Alinco’s radio product, in this manual and 
on the product you may find symbols shown below. Please read and understand 
the meanings of these symbols before starting to use the product.

Word

Definition

 Danger

Personal injury, fire hazard or electric shock may occur.

CAUTION

Equipment damage may occur.

NOTE

Precautions to avoid inconveniences.

 

DANGER HIGH VOLTAGE! NEVER

 touch the antenna terminal, ground 

terminal, antenna or counterpoise while transmitting. Place the EDX-3, antenna and 
counterpoise in positions where no one can touch them.

NEVER

 use without a ground connection.

NEVER

 transmit during internal maintenance. This may cause an electric 

shock.

USE

 the ground terminal for ground connection. The mounting plate is not 

connected internally.

Ground terminal

Mounting plate is NOT grounded.

DO NOT

 operate your transceiver when enough current is not available.

Be cautious to battery drain (flat-battery) of your car/boat. 

AVOID

 using the EDX-3 in areas where the temperature is below -20°C 

(-4°F) or above +60°C (+140°F).

Summary of Contents for EDX-3

















Reviews: