20
Basic Operations
How to program memory
1.
Select a frequency to be programmed in the
VFO mode and set the parameters as appropri-
ate. Refer the next page for programmable pa-
rameters.
2.
By pressing FUNC key, [F] and [Memory No.]
icons will appear on the display.
3.
Rotate the main dial (or press UP/DOWN key)
to select the desired memory channel number.
4.
An empty channel is shown with a flashing
[Memory No.] icon.
5.
By pressing V/M key while FUNC is on the
display, programming will be completed with
a beep sound.
6.
If a previously programmed channel is selected
in the step 3, the memory channel will be over-
written by the step 5.
7.
When CH-C is selected, CALL channel will
also be rewritten.
During the unregistered channel
IMPORTANT: • Program the Theft-Alarm data in CH99.
• For Channels from 100 to 139, VHF/UHF band can be programmed indiscrimi-
nately. (VHF/UHF mixed scanning is possible by the memory program scan-
ning.)
